Accurate Oil Quality Diagnostic Tool 5 LED Indicator Automotive Brake Oil Tester Car Vehicle Auto Testing Tool

Features:

1. Quick and Easy Testing: The brake fluid tester allows you to swiftly and easily check the water content in your brake fluid, providing results within seconds. This ensures you can maintain optimal brake performance with minimal effort.

2. Accurate Diagnostics: As an accurate oil quality diagnostic tool, this device delivers precise measurements, helping you determine the exact condition of your brake fluid and ensuring your vehicle's safety.

3. Robust Design: The liquid testing pen features a significantly improved design, making it durable and reliable for long-term use. Its sturdy construction ensures it can withstand frequent testing without compromising accuracy.

4. Versatile Usage: This automotive brake oil tester is compatible with common brake fluids including DOT3, DOT4, and DOT5, making it a versatile tool for various types of vehicles and brake systems.

5. User-Friendly Pen: The car brake fluid tester pen is designed for convenience, with a simple interface that allows even novice users to perform tests effortlessly. Its compact size makes it easy to carry and use whenever needed.

Specification:

Product size: 100.00x80.00x50.00mm/3.94x3.15x1.97inch

Material: ABS

Color: as shown in the picture

Applicable models: Suitable for most models on the market

LED indicator display:

Green LED light = Brake fluid H2O <1.5%, the water content of brake fluid is qualified

Yellow LED light = brake fluid water content ==1.5% to 3%, can continue to be used, and tested again after six months

Red LED light = The water content of the brake fluid H2O>3%, the brake fluid needs to be replaced and cannot be used anymore

Red LED: Replace the brake fluid LED

Flashing red: Replace the LED YELLOW: low moisture content, check the LED again after six months

Green: Brake fluid row/battery row

Technical parameters:

Green: Okay, that is, the brake fluid does not contain water

Green/yellow: The water content in the brake oil is less than 1%, the brake fluid has good performance and is easy to use.

Green/yellow/yellow: The water content in the brake fluid is about 2%, and the brake fluid can continue to be used.

Green/yellow/yellow/red: The water content in the brake fluid is about 3%, it is recommended to replace the brake fluid.

Green/yellow/yellow/red/red: The water content of the brake oil is at least 4%, and the brake oil must be replaced immediately, otherwise it is very dangerous.

How to use: Step 1. Press the button to turn on the brake fluid tester.The green light should be on.If the indicator light is not on, the battery may need to be replaced.

Step 2. Unscrew the lid of the brake fluid storage tank, and then remove the lid of the brake fluid tester.

Step 3. Dip the test probe into the brake fluid, and the LED light will indicate the percentage of water in the brake fluid.

Step 4. After the test, remember to tighten the lid of the brake fluid storage tank.

Step 5. The tester will automatically turn off after 12 seconds of inactivity.

Note:

Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!

Please allow 1-2cm measuring deviation due to manual measurement.

1 x Brake Fluid Tester