LAUNCH Creader 3001 OBD2 Scanner, Engine Fault Code Reader Mode 6 CAN Diagnostic Scan Tool for All OBDII Protocol Cars Since 1996, Lifetime Free UpdateLAUNCH Creader 3001 Scan Tool could be used that do not need update,”Plug and Play”. Small and convenient, anytime, anywhere.

 

Why Choose 2024 Elite Version LAUNCH Creader 3001 ?

Launch 3001 is one obd2 full function scan tool, support over 10000+ car models, simple but usuful obd2 scanner !Sloves your car problems!

 

Did you meet these problems?



Tired of paying 500-1000 usd per visit to the mechanic ? smh... (magically every problem, no matter how big or small, cost about the same to fix)


I bought similar diagnostic scanner before, and found it reads codes very slow ,and ended up throwing it in the garbage, and turn to a reliable brand...


I fixed the issue of my car but check engine warning light stays on?


I had an OBD2 code reader around 50-100 USD, and found it cannot even read misfire counts?



 If yes, You need a good partner :LAUNCH Creader 3001 2024 Elite Version .no matter you are DIYer or Car enthusiast,this is a true car scanner you always dream of .  If the engine light is not turned off in time

it will Cause Serious environmental pollution , Increased fuel consumption,Increased engine noise.Increased in temperature , ectLAUNCH X431 CR3001 OBD2 OBDII Scanner -check and delete engine fault code ,turn off engine warming light

MODE 6: On-board Monitor Test ,MODE 8: EVAP Test,I/M Readiness



Mode 6: On-board Monitor Test , Retrieves and displays test results for emission-related powertrain components and systems. Which is a way to find out if the engine has any misfire or compression problems on a particular cylinder, or other data that might indicate a problem but isn’t severe enough to trigger a check engine light.


Mode 8: The EVAP test function lets you initiate a leak test for the vehicle's EVAP system, that prevents fuel from evaporating out of your tank and contributing to smog. After fixed a problem with the fuel system,you can verify your fix right away, without waiting a few days (or longer) for your car to run it automatically.


I/M Readiness , Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing, which is convenient to determine the vehicle’s condition.This function can help you pass SMOG TEST.





O2 Sensor Test

Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.Accurately identifies failures of oxygen sensor and vehicle emissions related errors.



LAUNCH Creader 3001 is obd2 scanner for engine system with full functions of obd2.

Read Codes , Erase Codes, Reset Check Engine Light, I/M Readiness, Data Stream View, Freeze Frame, O2 Sensor Test, On-Board Monitor Test, EVAP System Test, Vehicle Info, DTC Lookup Library .



• Read and erase fault codes



Read DTCs (Diagnostic Trouble Codes) to locate the issues,Clear DTCs to turn off the Check Engine Light after certain repairs



• Live Data Viewing



Live data are displayed in a time-based chart to help customers to better analyze the abnormal parameter.This function will let you see engine performance information, if there are any trouble codes or issues with your engine or ECU.



• Freeze Frame



Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. It intended to provide you with a guide as to where a fault might be occurring within a vehicle.



• I/M Readiness Status

Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing, which is convenient to determine the vehicle’s condition.This function can help you pass SMOG TEST.



• O2 Sensor Test



 Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.Accurately identifies failures of oxygen sensor and vehicle emissions related errors.









• On-Board Monitor Test



etrieves and displays test results for emission-related powertrain components and systems. Which is a way to find out if the engine has any misfire or compression problems on a particular cylinder, or other data that might indicate a problem but isn’t severe enough to trigger a check engine light.



• Read Vehicle Information



Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.



• Component Test



Certain vehicle components can be actuated by commands sent from the scanner to test their operability

Multi-Language supported

The CR3001 operating system can quickly be changed into English, French, Russian, Spanish, German, Italian and Portuguese.



What is the difference between Launch 3001 scanner and OBD2 Scanner on the market?

They all work on MOST 1996 US-Based, 2000 EU-Based and Asian cars, check engine light, I/M monitor readiness test, view live data, view freeze frame data, read and clear codes. view vehicle info. BUT 3001 have more function, it can do O2 Sensor test , Evap system test, On-Board monitor test.



LAUNCH CR3001 is a high-quality automotive scanner,